Index > Garage Sale

Chevy Small Block Ported Heads 416-305 Castings, Bore machined to 4 inch 350 size, 1.98 intake 1.55 exhaust stainless Manley valves, Crane Springs and Retainers, 1.6 Proform Shaft Mounted Rockers, 235 intake 180 exhaust flow, Excelent flowing small intake port heads. $800

FOR SALE $5900.00

Complete custom built small block Mopar 360 cid engine bored .030 that is machine shop fresh. This engine was just Dyno tested and tuned to 472 HP & 467 TQ on pump gas.

This engine combination was built with the following parts : J/E Pistons, Moly file fit rings, Manley sportsman rods, Mopar crankshaft, Mellings H/V oil pump, Ultradyne solid flat tappet camshaft & lifters, Double roller timing chain set, Mopar performance timing chain tensioner, 308 Mopar heads with competition 5 angle valve job & Pocket porting, Jessel full roller rocker arms, Mopar performance valve covers, Edelbrock airgap intake, Fluid Dampner balancer, ARP head studs, Felpro gaskets. Complete engine only. Does not include the carburator, headers, or waterpump drive. (Matching tuned carburator can be purchased for $750.00) Complete Dyno sheet included with this engine.

Put this street / strip engine combo in your 3100 pound Mopar an you can be running 10.50 ET’s in the quarter mile.

Small Block HP 727 Trans, originally built by Frank Lupo, Roller bearing thrust washers, A&A reverse valve body, Chrome deep pan. just freshened and ready to run. New Cost was $1800 , will sell for $950

4200 stall 10 inch 727 converter by TCP Converters $400

5300 stall 8 inch 727 Coan Stock Eliminator converter $800

Del-West Titanium Valves - Set of 8 Intake and 8 Exhaust valves Will fit small block Mopar or Chevy, Intake diameter 2.100, Length 5.550, Stem 11/32. Exhaust diameter 1.600, Length 5.565, Stem 11/32. Valves are used but are like new! Call for more Info "Save" $400

Crower Cam, Chrysler Small Block, new solid roller, Duration, IN 295 EX 306, Lift IN .662, EX .667, Good stroker or blower cam. $225

Dynotech Header Mufflers, DTC-73-012402 New Muffler, Quick-Tune, Slip-On, 4 in. Inlet/4 in. Outlet, Brushed Stainless Steel, Pair $475

Camcraft , Used Roller Can, Small Block Chevy, .050 duration intake 264, exhaust 272, cam lift intake 264, exhaust 272, valve lift in 635, ex 650, 106 center line. $175