Index > Engine Machining

Some engines that we have built, We rebuild all automotive and Marine engines.
We specialize in custom builds, Please call us with your needs

Subaru	Acura / Honda	Toyota	Nissan	Porsche	Volvo
Mitsubishi	Pontiac / Buick	GM / Chevy	Mopar	AMC / Jeep	Ford
		Land Rover

Video

• SB Chevy 355 SK Modified 2brl Engine on Dyno
• Suabru EJ20 water hole drilling
• Machining AEBS Sleeves for case bolt access
• O-Ringing a Volvo B230F Block
• Rottler HP6A Honing Honda B18C
• Resurfacing Intake Surface on Head
• Rottler HP6A Honing Honda F20C
• Rottler HP6A Honing 3
• Rottler HP6A Honing 2
• Rottler HP6A Honing 1
• Machining the top sleeve register on a Nissan SR20 block for AEBS T-Sleeves
• Lower Sleeve Removal of Nissan SR20 Block for AEBS T-Sleeves
• Machining Lower Sleeve Register on Nissan SR20 for AEBS Sleeves
• Acura B18 O-Ring for Stainless wire w/ AEBS Sleeves
• Chevy 454 Dyno Pull 630HP
• Acura B18C1 Darton Sleeves O Ringing
• Acura B18C1 lower sleeve machining
• Machining a B18 Honda block for Darton Sleeves. w/ Rottler F68A CNC Machine.Part 1
• Machining a B18 Honda block for Darton Sleeves. w/ Rottler F68A CNC Machine.Part 2
• Subaru Ej20 water jacket hole blend
• Subaru EJ20 Water Coolant Hole Drilling
• Small Block Chevy - being cut for a stroker crank
• SERDI 100 - Cutting Valve Seats
• Porsche 2.5L being machined for Darton MID Sleeves - 1
• Porsche 2.5L being machined for Darton MID Sleeves - 2
• CNC Machining the combustion chambers on a set of flathead heads.
• Perf. Innovations Subaru EJ25 O Ringing
• Ford 2300 Mini Stock Engine
• Machining Honda B18 for Stainless O-Rings
• Blown Big Block Mopar on the Dyno
• Blower_Car.avi
• Thompson SK motor running on the dyno
• Chevy 396
• Opening Up the Chambers on EJ20 heads for EJ25 Short Block
• Ej20-Ej25-Heads
• Chrysler SK Modified for Thompson
• Machining a Mopar 360 rear main cap to the 340 out side size
• 383 Small Block Chevy Dyno Pull
• Small Block Chevy Dyno Pull
• Blown Big Block Mopar on the Dyno
• Small Block Chrysler on the Dyno
• Small Block Dyno Pull
• Honda B16 AEBS Sleeves - Water Passage Drilling
• 1 Drilling Water Holes in a Nissan QR25 Block with AEBS Sleeves
• 2 Drilling Water Holes in a Nissan QR25 Block with AEBS Sleeves
• 3 Drilling Water Holes in a Nissan QR25 Block with AEBS Sleeves
• O ringing a Nissan QR25 Block with AEBS Sleeves
• Machining a torque plate for a Nissan QR25 with AEBS Sleeves
• Machining the Head chamber for clearance on a Subaru Head
• Machining the chamber on a Subaru Head
• Machining the Sleeve coolant holes for a Nissan QR25 with AEBS Sleeves
• Machining the Sleeve Top Resister for a Nissan QR25 with AEBS Sleeves
• Machining Nissan QR25 Block for AEBS Sleeves
• 440 Mopar stroked out to a 535 cubic inch
• Dyno Pull 440 - Still tuning, but has 665 ft lbs of toque so far.
• 360 Mopar running on the Dyno 472HP - 467 TQ
• Subaru Block Sleeving O Ring Machining with cnc machine
• B16 Honda with AEBS sleeves Drilling water coolant holes on cnc machine